Hugin Compiling Ubuntu
Who Is This Page For
These instructions contain the collective wisdom of Hugin contributors that are using Ubuntu or any of its variations (Ku/Xu/Lu/Edu/...buntu). They are work in progress and updated when newer versions of Ubuntu are released or when Hugin introduces new dependencies. They have worked, at the time of release or soon thereafter, with all 'buntu versions up until 12.04. They are intended to help contributors on the learning curve. If you are not here to contribute, spare yourself the effort and see the Shortcut section below.
They are likely to work only for the latest 'buntu release, but you can check this page's history at the time that the older 'buntu version was the most recent one to find the specifics for that version.
If you are new here, read the whole page. It is recommended that you go sequentially through it.
If you're familiar with the process and have run it a few times, look at the what's new section for important news.
Apart from the odd change in package name, nothing should be substantially different (and if it does not work, please leave a comment on the hugin-ptx mailing list). Don't worry if the same package appears twice in an apt-get install line - apt-get will update existing packages if there is a newer version, and ignore duplicates if the latest version is already installed. On the other hand, if apt-get says that it can't find a package, it might be the odd change in package name. You can find a replacement package by using apt-cache search with a substring of the package required, e.g.:
apt-cache search wxW
The goal is to build hugin and the whole set of helper applications required, and start understanding the building process. You will need a deeper understanding of the building process if you want to:
- develop code
- translate the latest strings
- document the latest features with manuals and tutorials
- package for distribution
That knowledge is beyond the scope of this document. This document ends with a binary that is fit for installation on your machine. It is not fit for any other purpose, particularly not for distribution. CMake is known to build broken deb packages. Please do not distribute these binaries.
What's New
25 January 2013: The build instructions for the most recent versions of enblend, libpano13, and hugin have been updated for 'buntu 12.04LTS. A lot of information applying to previous releases has been deleted in an effort to make the page more readable. If you're building on an earlier release, be sure to click the "View History" tab above and check the build details around the time your 'buntu version was released.
9 May 2011: The integration of the python_scripting development branch brings new dependencies and a new build-time configuration switch for Hugin. See changes in the documentation below. swig2.0 is officially distributed only with Natty (11.04 onwards). If you have an older Ubuntu version you will either have to forego the python scripting feature or find an alternative swig2.0 (either a PPA or build it yourself).
2 May 2011: If you are using an earlier version of Ubuntu than 11.04, there is a chance that your Mercurial version is too old for grabbing updates. New (non-critical security) updates to a program do not get added to old versions of Ubuntu, so any new changes will need to be added manually. When running Mercurial (pull, update, etc), you may get an error like
abort: requirement 'dotencode' not supported!
To fix this, you can use the package archive from Mercurial PPA Packagers and get the latest release:
sudo apt-add-repository ppa:mercurial-ppa/releases sudo apt-get update sudo apt-get install mercurial
5 March 2010: Foreign library libtclap removed from source tree. This introduces a new dependency on libtclap-dev
February 2010: Libpano has migrated from SVN to Mercurial.
Shortcut
September 2024: Currently there is no maintainer for this repository. So there are no new versions in these 'buntu repository. New maintainers are always welcome. For more details see https://launchpad.net/~hugin/+archive/ubuntu/hugin-builds
Hugin evolves fast and the official 'buntu distributions carry versions that are usually 3-6 months older than the 'buntu distribution date. Moreover, they do not backport Hugin and related tools.
Even if you religiously follow the 'buntu six months update cycle, you may be using a version of Hugin that is one or two release cycles in our past. If your sole objective is to use the new features of Hugin, the instructions in this section are for you. Start a command line terminal, type the three commands and you're done.
If for some reason that's not enough for you - if you want to actually learn and become a contributor; or if you're just curious about getting even closer to the bleeding edge and trade stability for features and excitement, the rest of this document is for you.
Stable
This will install the latest stable version of the tools:
sudo add-apt-repository ppa:hugin/hugin-builds sudo apt-get update sudo apt-get install hugin enblend panini
Unstable
This will install the latest unstable version of the tools. While they are likely to work in most cases, there is no guarantee and they are not recommended for a production environment. Use at your own risk, and please report (and if possible fix) bugs. Most of the time these unstable builds are closer to the bleeding edge than to the stable builds. If you want the really really really bleeding edge, you'll have to work through the instructions in the next sections, though.
sudo add-apt-repository ppa:hugin/hugin-builds sudo add-apt-repository ppa:hugin/nightly sudo apt-get update sudo apt-get install hugin enblend panini
Building Environment
Since we are going to build hugin, libpano13 and enblend we need to download and install all the development packages. This is very easy with apt-get. In a terminal window (K menu -> System -> Konsole or Applications -> Accessories -> Terminal (in Kubuntu), Applications -> Accessories -> Terminal (in Ubuntu)), enter:
sudo apt-get install build-essential autoconf automake1.9 libtool flex bison gdb \ libc6-dev libgcc1 cmake pkg-config help2man checkinstall
To get the bleeding edge we'll need access to the SVN and Mercurial repositories, and for this we need the correct tools:
sudo apt-get install subversion mercurial
Not necessary, but useful if you want to revisit configuration sets in ccmake:
sudo apt-get install cmake-curses-gui
To get on the same page as far as file system layout is concerned, we'll create a folder to contain all source code in your home folder:
cd mkdir -p src
For Distributors
If you want to build packages for distribution, you will also need the following tools and settings.
sudo apt-get install subversion-tools sudo echo 'deb-src ftp://ftp.at.debian.org/debian ../project/experimental main' > /etc/apt/sources.list.d/debian-experimental.list sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 55BE302B sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 8B8D7663 sudo apt-get update sudo apt-get install devscripts
You will also need an OpenPGP key, and a Launchpad account. Follow the instructions for Launchpad account creation, including the signing of the Ubuntu Code of Conduct.
Moreover, it is likely that your environment is not clean enough for distribution builds. In that case, and to produce binaries for other Ubuntu series than the one you are running, you will want to set up a dchroot environment (to be documented later on).
Building Libpano13
libpano13 is the new version of the PanoTools libraries. This is a necessary component for hugin, and we need to build it first. To build libpano13 we need some libraries and particularly their development ("dev") packages:
sudo apt-get install zlib1g-dev libpng12-dev libjpeg-dev libtiff-dev
We then need to download the source code from the central repository:
mkdir -p ~/src/libpano cd ~/src/libpano hg clone http://hg.code.sf.net/p/panotools/libpano13 libpano.hg
If you're a contributor with write access, use the following clone command instead:
hg clone ssh://USERNAME@hg.code.sf.net/p/panotools/libpano13 libpano.hg
In the future there is no need to get the whole source again. Just issue the following commands to bring your source up to date:
cd libpano.hg hg pull hg up cd ..
Now start the building process. Set -DCMAKE_BUILD_TYPE=Debug if you want to help investigate/debug a problem and capture even more debugging information.
mkdir libpano.build cd libpano.build cmake ../libpano.hg -DCMAKE_INSTALL_PREFIX=/usr/local -DCPACK_BINARY_DEB:BOOL=ON \ -DCPACK_BINARY_NSIS:BOOL=OFF -DCPACK_BINARY_RPM:BOOL=OFF -DCPACK_BINARY_STGZ:BOOL=OFF \ -DCPACK_BINARY_TBZ2:BOOL=OFF -DCPACK_BINARY_TGZ:BOOL=OFF -DCPACK_BINARY_TZ:BOOL=OFF \ -DCMAKE_BUILD_TYPE=RelWithDebInfo make package sudo dpkg -i libpano13-*-Linux.deb
The old autotools way
The above described building process uses CMake to build libpano which has many advantages. Amongst others it creates a clean package to install / deinstall and decreases the likelihood of wrecking the system. However CMake support is relatively new in libpano. The old autotools way is documented below for completeness. You should not need it. However if you do, make sure to run either the CMake build or the autotools build on fresh repository checkouts to avoid interferences.
./bootstrap
If any libraries are missing, the script will complain (or at least, let you know that some library hasn't been found). In that case you probably need to install the library. To find in what package is that library, a general rule is to run the command apt-cache search missingfile
, find the relevant library and install both the library and the related -dev
package.
Run the ./configure
script and repeat this process until you have met all the dependencies.
Then we are ready to launch the make process with
make
If the library successfully compiles, you have to install it with
sudo make install sudo ldconfig
The last part is for the OS to be aware of the new library (that has been installed in /usr/local/lib
).
Building Enblend
Get the dependencies. If you are working with large images (300 megapixels and up), you should have a libtiff-dev compiled with large file support and libstdc++6.
sudo apt-get install libtiff4-dev libopenexr-dev libboost-system-dev \ libboost-filesystem-dev libboost-graph-dev libboost-thread-dev \ freeglut3-dev libglew-dev libxi-dev libxmu-dev libplot-dev libgsl0-dev \ liblcms2-dev
UPDATE: the latest package libvigraimpex-dev included in Linux Mint 15 (=Ubuntu 13.04) has the version 1.9.0-0ubuntu2 - and I did not encounter any problems with using this instead of compiling it myself:
sudo apt-get install libvigraimpex-dev
If you still want to compile it yourself, here's how: The most recent version of Enblend (4.2) also requires version 1.9 of the VIGRA computer vision library. Unfortunately, 'buntu versions up to and including the forthcoming 13.04 (Raring Ringtail) only provide version 1.8 of the VIGRA library, so you'll have to build your own, as follows:
cd ~/src wget http://hci.iwr.uni-heidelberg.de/vigra/vigra-1.9.0-src.tar.gz tar -zxvf vigra-1.9.0-src.tar.gz cd vigra-1.9.0 cmake . sudo checkinstall sudo ldconfig
The "sudo checkinstall"
step will ask you a few questions (respond with the default answers), and then create and install a package which can later be removed with synaptic or dpkg -r. If you're not worried about being able to cleanly remove the VIGRA library at a later date, you can substitute "sudo make install"
.
If you also want to build the documentation, add the following dependencies, and add "-DDOC=ON" to the cmake command below. (Be warned, however, that this will drag in over 700MB of additional dependencies. Unless you have a pressing need to build the documentation yourself, you can save time and disk space by downloading the PDF docs from http://enblend.sourceforge.net .)
sudo apt-get install texi2html texinfo fig2ps tidy gnuplot libxml-xpath-perl imagemagick
Once all dependencies are in place, get the code. The official repository has migrated from CVS to Mercurial:
mkdir -p ~/src/enblend cd ~/src/enblend hg clone http://hg.code.sf.net/p/enblend/code enblend.hg
If you already have checked out enblend, to update the code to the latest version you need to run:
cd enblend.hg hg pull hg update cd ..
Then create a build directory and build in there. And install the package.
The options below are good for modern multi-core computers. For a single core, you may be better off setting ENABLE_OPENMP to OFF and ENABLE_IMAGECACHE to ON. The two options are mutually exclusive.
mkdir enblend.build cd enblend.build cmake ../enblend.hg -DENABLE_GPU:BOOL=ON -DENABLE_IMAGECACHE:BOOL=OFF -DENABLE_OPENMP:BOOL=ON \ -DCPACK_BINARY_DEB:BOOL=ON -DCPACK_BINARY_NSIS:BOOL=OFF -DCPACK_BINARY_RPM:BOOL=OFF \ -DCPACK_BINARY_STGZ:BOOL=OFF -DCPACK_BINARY_TBZ2:BOOL=OFF -DCPACK_BINARY_TGZ:BOOL=OFF \ -DCPACK_BINARY_TZ:BOOL=OFF -DCMAKE_BUILD_TYPE=Debug -DCMAKE_INSTALL_PREFIX:PATH=/usr/local make package sudo dpkg -i enblend*.deb
Building Hugin
Dependencies
First we need to activate the universe
repository (in the synaptic package manager, or by editing the /etc/apt/sources.lst file for example) and get the dependencies.
The following command will install on your system all build time dependencies except libpano13.
sudo apt-get install libwxgtk2.8-dev libtiff4-dev libpng12-dev \ libopenexr-dev libexiv2-dev freeglut3-dev libglew-dev libboost-dev \ libboost-thread-dev libboost-regex-dev libboost-filesystem-dev \ libboost-iostreams-dev libboost-system-dev libboost-signals-dev \ gettext liblapack-dev libxi-dev libxmu-dev libtclap-dev liblensfun-dev
If you want to build hugin with python scripting functionality, you will also need a copy of the python development library and swig2.0. Unfortunately, the swig2.0 package is only included in Natty (11.04) or better. If you are on Lucid or Maverick, you can obtain a swig2.0 package by enabling the Hugin PPA:
sudo add-apt-repository ppa:hugin/hugin-builds sudo apt-get update
Then (for all versions from Lucid onwards) execute:
sudo apt-get install python-dev swig2.0
You could install libpano13 on your system with the command below. But it is recommended that you build your own libpano13 (see section above), since the version of libpano13 in the Ubuntu repositories is probably too old. Alternatively, there may be a recent enough version of libpano13 in the Hugin PPA. If going this last route, you can add it as shown above.
sudo apt-get install libpano13-dev
wxWidgets is a critical dependency for the Hugin GUI. In the official Ubuntu repositories it is usually at least a few releases behind the current release, and in some cases many releases behind. The wxWidgets project provides alternative repositories with newer versions, as well as a instructions to build binary packages of the most recent releases. Newer versions of wxWidgets are not (yet) absolutely necessary, but since eventually things evolve they are useful for development, testing, and in general should give a better user interface experience as wxWidgets improves over time.
The following are run-time dependencies. Strictly speaking you don't need them to build Hugin, but you will need them to use it. If you follow the instructions on this page to build ExifTool and/or Enblend, you don't need to install them this way.
sudo apt-get install libimage-exiftool-perl enblend python-argparse
Note: If you use Python 2.7, there is no need to install "python-argparse" package. Because Python 2.7 has included "argparse" as its core module. Ubuntu 13.10 has Python 2.7 installed by default, so one will find that there is no "python-argparse" package in Ubuntu's repository. For Ubuntu 13.10, you can install run-time dependencies as:
sudo apt-get install libimage-exiftool-perl enblend
Fetch the Source Code with Mercurial
If you already have a repository clone, you only need to pull the latest changes and update the code with:
cd ~/src/hugin/hugin.hg hg pull hg update
Otherwise, you need to clone the repository and decide which version/branch to build with:
mkdir -p ~/src/hugin cd ~/src/hugin hg clone http://hg.code.sf.net/p/hugin/hugin hugin.hg cd hugin.hg hg branches
If you are a contributor with write access, you can use
hg clone ssh://${USER}@hg.code.sf.net/p/hugin/hugin hugin.hg
The `hg branches` command will list all available branches. If you decide, e.g., to build the 2010.0 branch, you will update to it with:
hg update -C 2010.0
Advanced Use - Multiple Source Trees
You may want to build multiple versions of Hugin on your machine at the same time, e.g. when you want to build side by side a stable version for your productivity and a development version to give feedback to the developers. In that case, you will clone the Mercurial repository that is already on your drive and update from it a source tree to a different branch. Mercurial takes care of details such as optimizing disk usage. The commands for this are:
cd .. hg clone hugin.hg another_hugin cd another_hugin hg update -C default
You can have as many "another_hugin" folders as you want. Just make sure, when pulling the latest updates from SourceForge, to first pull your main repository (the one you cloned from http://hugin.hg.sourceforge.net:8000/hgroot/hugin/hugin. Then pull all others:
cd ~/src/hugin/hugin.hg hg pull hg update cd ../another_hugin hg pull hg update
Reference: [1]
Configure the Build Environment
Rule: You always want to build outside of the source tree to keep the source tree clean. And to avoid confusion, if you have multiple source trees it is preferable to build for each of them in a separate build folder.
Next we set up the build environment using cmake.
If you compiled and installed libpano to a non standard location set the variables CMAKE_INCLUDE_PATH and CMAKE_LIBRARY_PATH to point to your install location's include and lib directories.
If you are building for distribution, you want to set CMAKE_INSTALL_PREFIX=/usr
cd ~/src/hugin mkdir hugin.build cd hugin.build cmake ../hugin.hg -DENABLE_LAPACK=YES -DCPACK_BINARY_DEB:BOOL=ON -DCPACK_BINARY_NSIS:BOOL=OFF \ -DCPACK_BINARY_RPM:BOOL=OFF -DCPACK_BINARY_STGZ:BOOL=OFF -DCPACK_BINARY_TBZ2:BOOL=OFF \ -DCPACK_BINARY_TGZ:BOOL=OFF -DCPACK_BINARY_TZ:BOOL=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo \ -DBUILD_HSI:BOOL=ON
The last line of the above cmake statement is for python scripting. The first switch activates the scripting interface (which is deactivated by default because it does not work simply out of the box on all supported platforms) and the second switch fixes a bug in the CMake script to find swig. Self-compiled swig does not need the -DSWIG_EXECUTABLE switch since it is found automatically by the CMake script.
If you get an error building, try removing the last line of the above cmake statement. Another cause may be a wrong version of libpano13, even if you built it yourself. Go back and check that you are using a (newer) stable branch. Try switching to libpano13-2.9.18 (run hg update -C libpano13-2.9.18 in the proper folder), rebuild as instructed above, and try again.
Set -DCMAKE_BUILD_TYPE=Debug if you want to help investigate/debug a problem and capture even more debugging information (for example, this will enable DEBUG_DEBUG(...) to output debug message), however Hugin will be slower and may not work as expected. Don't use a Debug build for production.
Set -DREBUILD_TRANSLATIONS=ON if you want to rebuild translation each compile time.
If you are building for install on your own machine only, -DDISABLE_DPKG=ON will significantly speed up the package generation. Do not distribute packages built this way, they don't have proper dependencies. This is primarily meant for developers doing cycles of fix-compile-install-test.
Build and Install
Finally, we use make to build the code and package it, and dpkg to install it.
make package sudo dpkg -i hugin-*-Linux.deb sudo ldconfig
Important: the package does not track dependencies yet, so it likely to fail on machines others than yours.
Reference: [2]
Dive into the Code
If you want to start to navigate, understand and modify the code, the doxygen generated documentation will be helpful to you.
sudo apt-get install doxygen graphviz cd ~/src/hugin/hugin.hg/src doxygen Doxyfile
Point your browser to ~/src/hugin/hugin.hg/src/hugin/html/index.html and you have access to all available information. If you find that a class, a function, or anything else is not properly documented; and if you delve into the source code to understand it, kindly add documentation to the code so that the next person in your situation can use your experience as a stepping stone. Thank you!
Automatic Control Point Detectors
Autopano-sift-C
Pre-Requisites:
sudo apt-get install libxml2-dev
To build
(Note February 2011: The latest source code of autopano-sift-C has been unstable for a long time now and nobody is working to fix it. Use the 2.5.1 release tarball instead)
mkdir -p ~/src/apsc cd ~/src/apsc hg clone http://hugin.hg.sourceforge.net:8000/hgroot/hugin/autopano-sift-C apsc.hg cd apsc.hg hg branches hg update -C 2.5.1 cd .. mkdir apsc.hg.build cd apsc.hg.build cmake ../apsc.hg -DCMAKE_INSTALL_PREFIX=/usr/local -DCPACK_BINARY_DEB:BOOL=ON \ -DCPACK_BINARY_NSIS:BOOL=OFF -DCPACK_BINARY_RPM:BOOL=OFF -DCPACK_BINARY_STGZ:BOOL=OFF \ -DCPACK_BINARY_TBZ2:BOOL=OFF -DCPACK_BINARY_TGZ:BOOL=OFF -DCPACK_BINARY_TZ:BOOL=OFF \ -DCMAKE_BUILD_TYPE=Debug make package sudo dpkg -i autopano-sift-C-*-Linux.deb
Match-n-shift
Match-n-shift is yet an other Autopano-SIFT replacement. It comes in a bundle with pto file manipulation perl libraries and a rich selection of other tools that use nona, enblend, ImageMagick among other things. To use match-n-shift, you need to install at least the Panotools::Script library and some other perl modules. It requires:
- Image::Size 2.9
- Storable 2.0
- Image::ExifTool 6
Chances are that you do not need to update Storable which is a standard perl module. To check the version of installed versions of these modules, write these lines to the command prompt:
perl -MStorable -le 'print Storable->VERSION;' perl -MImage::Size -le 'print Image::Size->VERSION;' perl -MImage::ExifTool -le 'print Image::ExifTool->VERSION;'
There are various ways to install or upgrade these modules. Ubuntu has binary packages for many perl modules, you can skip the CPAN installation below and type:
sudo apt-get install libimage-size-perl libimage-exiftool-perl
Alternatively, perl is an interpreted language and these modules are pure perl, so installing from source is an easy thing.
The best place to install perl modules is directly from a CPAN archive. CPAN is short for Comprehensive Perl Archive Network. The program to interact with CPAN comes with all perl installations. Start it by running:
sudo cpan
If this is your first time running the program you will be asked a number of questions (you can safely accept the suggested values). Last question lets you select a number of CPAN mirrors nearest to you.
When all is done, you can enter the install commands after the 'cpan>' prompt:
install Image::Size Storable Image::ExifTool
Answer 'y' to any question of dependencies and wait for install to complete. 'exit' leaves the cpan shell.
Next, you need to retrieve and install the Panotools-Script collection of perl libraries (Panotools::Script) and programs that use them - including match-n-shift:
hg clone http://hg.code.sf.net/p/panotools/Panotools-Script Panotools-Script cd Panotools-Script perl Makefile.PL make make test sudo make install
Just to confuse you, you can also ignore everything above and just install Panotools::Script and all its dependencies from CPAN. From command line, type:
sudo cpan Panotools::Script
You can run match-n-shift from command line using the same parameters as autopano-c-complete.sh or you can modify hugin to run it for you:
- start Hugin
- navigate the menu File to Preferences
- In the Preferences window, open the Autopano tab
- Select Autopano -> Autopano-SIFT
- tick the checkbox for Use alternative Autopano-SIFT program
- enter the full path to match-n-shift (/usr/local/bin/match-n-shift) in the Autopano-SIFT field
- enter the following string in the Arguments field:
-f %f -v %v -c -p %p -o %o %i
MatchPoint
MatchPoint is a next generation CP generator. The result of a GSoC2007 project, it is still very experimental. Experience reports needed. Read more here
Matchpoint is now located inside the main hugin source tree, no need to checkout separately. It is compiled together with hugin, but not installed by default.
- copy the MatchPoint executable into /usr/local/bin manually
cd ~/src/hugin/hugin.hg-build sudo cp src/matchpoint/matchpoint /usr/local/bin/
- edit /usr/local/bin/autopano-c-complete.sh (do it with sudo to have the necessary permission)
- line 79: replace the .key.gz extension with .key (not sure if matchpoint supports compression)
- lines 83 and 88: replace generatekeys "$arg" $FILENAME $SIZE with matchpoint "$arg" $FILENAME (not sure if the size option or any other options of the original generatekeys are applicable)
Pan-o-matic
Yet another control point generator Home Page
sudo apt-get install libboost-dev
Download Panomatic 0.9.4 bz2 and if you're on Ubuntu 9.10 or newer also the patch for the gcc4.4 compiler.
mkdir -p ~/src/panomatic cd ~/src/panomatic wget "http://aorlinsk2.free.fr/panomatic/download.php?d=7&v=0.9.4" -O panomatic-0.9.4-src.tar.bz2 wget http://aorlinsk2.free.fr/panomatic/panomatic_gcc44.patch patch tar xvfj panomatic-0.9.4-src.tar.bz2 cd panomatic-0.9.4 patch -p 1 < ../panomatic_gcc44.patch ./configure make sudo make install
To use Pano-o-matic, open Hugin
- In File > Preferences > Autopano :
- Select Autopano-SIFT
- Check "Use alternative autopano-SIFT program"
- Choose the path to the binary ( /usr/local/bin )
- In Arguments, put : -o %o %i
Pablo's variation
Around the end of the year 2009, Pablo integrated a new experimental descriptor based on the geometric blur and DAISY papers. Also, Pablo said that the algorithm is not really based on a published approach, just on some ideas that are mentioned in a few of them, and its currently simpler than any of them:
o geometric blur: [3]
o daisy: [4]
o descriptor learning: [5]
To build that version of panomatic instead, follow these instructions:
This is current the subject of a GSoC 2010 project and may be available in future versions of Hugin.
sudo aptitude install libboost-python-dev bzr cmake libvigraimpex-dev
bzr branch lp:~pablo.dangelo/hugin/panomatic-lib mkdir build cd build cmake ../panomatic-lib make sudo make install
To use the new descriptor the arguments for Hugin are: --sieve1size 100 --sieve2size 2 -o %o %i
ExifTool
ExifTool is no longer mandatory for Hugin to work. It is used to pass metadata from the input to the output images during the stitching process.
ExifTool is a platform-independent Perl library plus a command-line application for reading, writing and editing meta information in image, audio and video files.
Usually the version distributed with Ubuntu (8.15 in Ubuntu 10.10; 7.89 in Ubuntu 10.4) is good enough and you don't need to bother with the following instructions. However there were situations in the past and there might be situations in the future where the latest versions offer better support. These issues will occur most likely with specific camera brands/models and the most recent models. The following instructions are for those cases.
sudo apt-get purge libimage-exiftool-perl
wget http://www.sno.phy.queensu.ca/~phil/exiftool/Image-ExifTool-8.50.tar.gz tar -xzf Image-ExifTool-8.50.tar.gz cd Image-ExifTool-8.50 perl Makefile.PL make test sudo make install
Pano Viewers
PanoGLView
PanoGLView is an OpenGL hardware accelerated interactive immersive viewer for equirectangular images.
Pre-Requisites:
sudo apt-get install wx-common libwxgtk2.8-dev libglew-dev
To build and install:
mkdir -p ~/src/panoglview cd ~/src/panoglview hg clone http://hugin.hg.sourceforge.net:8000/hgroot/hugin/panoglview panoglview.hg cd panoglview.hg hg update ./bootstrap ./configure make sudo make install
FreePV - DEPENDENCIES ARE BROKEN - FAILS TO BUILD
Pre-Requisites:
sudo apt-get install cmake make pkg-config g++ mozilla-devscripts freeglut3-dev zlib1g-dev \ libjpeg-dev libxext-dev libxmu-dev x11proto-xf86vidmode-dev libxxf86vm-dev libnspr4-dev \ libxml2-dev libpng12-dev
To build
svn co https://freepv.svn.sourceforge.net/svnroot/freepv/freepv/trunk/ freepv cd freepv cmake . make sudo make install
Panini Perspective Tool
Strictly speaking, Panini is more than just a viewer. It's a powerful tool to extract/transform views and can also be easily used as a viewer.
Get dependencies:
sudo apt-get install qt4-qmake libqt4-dev zlib1g-dev
Get code:
mkdir -p ~/src/pvqt cd ~/src/pvqt svn co https://pvqt.svn.sourceforge.net/svnroot/pvqt pvqt.svn
Build:
cd pvqt.svn qmake panini.pro make
Install (brute force):
sudo cp Panini /usr/local/bin/
Menu Entry for Kubuntu:
kmenuedit
in kmenuedit
- navigate to Graphics
- click on New Item
- Enter "Panini" as Name
- Enter "Perspective Tool" as Description
- click on the empty icon and look for an icon (I used the akonadi one)
- Enter "Panini" as Command
- Click on Save button
Notes for Packagers
Tarballs
- to get an updated ChangeLog in Mercurial repositories (Hugin has it also in the cmake invocation, use -DUPDATE_CHANGELOG=1)
hg log --follow --style=changelog
- to update the ChangeLog in SVN repositories (Panotools)
svn up svn2cl svn ci
Deb Packages
The deb packages built by CMake (2.8.2) are broken by Debian standard. Please do not distribute them. There are official updated recent packages at the Hugin PPA mentioned above which include nightlies (produced every 24 hours) and stables (produced out of released tarballs). If you miss binaries for your series of Ubuntu and you have built them for yourself following the instructions above, considering moving up one level and contributing to the Hugin PPA.