Difference between revisions of "Hugin Compiling OpenSuse"

Latest revision as of 22:44, 14 July 2011

To build enblend, enfuse, libpano and hugin, follow the instructions below.

Dependencies and prerequisites needed for OpenSuSE 10.3

gettext
libjpeg-devel
boost-devel
boost	
wxGTK-devel
wxGTK
OpenEXR-devel
openEXR
libexiv2-devel
libtiff-devel
liblcms-devel
cmake

Enblend and Enfuse (cvs)

cvs -d:pserver:anonymous@enblend.cvs.sourceforge.net:/cvsroot/enblend login
cvs -z3 -d:pserver:anonymous@enblend.cvs.sourceforge.net:/cvsroot/enblend co -P enblend
cd enblend
make -f Makefile.cvs
./configure
make
sudo make install

libpano13

mkdir -p /usr/src/panotools/trunk
cd /usr/src/panotools/trunk
svn co https://panotools.svn.sourceforge.net/svnroot/panotools/trunk/libpano libpano13
cd libpano13
sh ./bootstrap
make
sudo make install install-data-am

Hugin

Checkout Hugin

mkdir /usr/src/hugin
cd /usr/src/hugin
svn co https://hugin.svn.sourceforge.net/svnroot/hugin/hugin/trunk hugin

if you need to build a specific SVN revision, e.g. 2765, you can slightly change the svn command to get it. e.g.:

svn co -r 2765 https://hugin.svn.sourceforge.net/svnroot/hugin/hugin/trunk/ hugin

Compile Hugin

mkdir /usr/src/hugin/BuildHugin
cd /usr/src/hugin/BuildHugin
ccmake /usr/src/hugin/hugin
cmake /usr/src/hugin/hugin
make && sudo make install

autopano-sift-C

Needed for automatic control point generation, restricted by software patents in some countries.

cd /usr/src
svn co https://hugin.svn.sourceforge.net/svnroot/hugin/autopano-sift-C/trunk/ autopano-sift-C
cd autopano-sift-C
mkdir build && cd build
cmake -DCMAKE_INSTALL_PREFIX=/usr/local ..
make
sudo make install

Status reports

Success Report: On OpenSuSE 10.2 ist's really straightforward.

clean SVN chechout (version as of 20070204)
followed the instructions in INSTALL_cmake.
The only non-standard thing is libpano13, (2.9.12 was used)
All other dependencies have been resolved using the standard (smart) repositories for OpenSuSE (wxGTK is 2.6.3.3).

Success Report: Confirmed working on OpenSuSE 10.3 and x86_64 architecture.

Success Report: On OpenSuSE 11.0 x86_64.

you will need to make sure you have all of the build tools. (examples: gcc+ automake)
Also had to install libXML2 for autopano

For OpenSuSE 11.1:

On x86_64 systems with libraries in /usr/lib64 or /usr/local/lib64 such as OpenSuSE, redhat or fedora you need to pass LIB_SUFFIX=64 to cmake

@@ Line 1: / Line 1: @@
-# Dependencies needed for OpenSuSE 10.3
+To build enblend, enfuse, libpano and hugin, follow the instructions below.
-#:<pre>
-#:gettext
-#:libjpeg-devel
-#:boost-devel
-#:boost
-#:wxGTK-devel
-#:wxGTK
-#:OpenEXR-devel
-#:openEXR
-#:</pre>
-#compile and install pano13
-#:<pre>
-#:mkdir -p /usr/src/panotools/trunk
-#:cd /usr/src/panotools/trunk
-#:svn co https://panotools.svn.sourceforge.net/svnroot/panotools/trunk/libpano libpano13
-#:cd libpano13
-#:sh ./bootstrap
-#:make
-#:sudo make install
-#:</pre>
-# Install cmake
-# create the svn-source-directory  /usr/src/hugin
-#:<pre>
-#:mkdir /usr/src/hugin
-#:cd  /usr/src/hugin
-#:svn co https://hugin.svn.sourceforge.net/svnroot/hugin/hugin/trunk hugin
-#:</pre>
-# create build-directory
-#:<pre>mkdir /usr/src/hugin/BuildHugin
-#:</pre>
-# configure
-#:<pre>cd /usr/src/hugin/BuildHugin
-#:ccmake /usr/src/hugin/hugin
-#:cmake /usr/src/hugin/hugin
-#:</pre>
-# make and install
-#:<pre>make
-#:sudo make install
-#:</pre>
+== Dependencies and prerequisites needed for OpenSuSE 10.3 ==
+ gettext
+ libjpeg-devel
+ boost-devel
+ boost
+ wxGTK-devel
+ wxGTK
+ OpenEXR-devel
+ openEXR
+ libexiv2-devel
+ libtiff-devel
+ liblcms-devel
+ cmake
+== Enblend and Enfuse (cvs) ==
+ cvs -d:pserver:anonymous@enblend.cvs.sourceforge.net:/cvsroot/enblend login
+ cvs -z3 -d:pserver:anonymous@enblend.cvs.sourceforge.net:/cvsroot/enblend co -P enblend
+ cd enblend
+ make -f Makefile.cvs
+ ./configure
+ make
+ sudo make install
+== libpano13 ==
+ mkdir -p /usr/src/panotools/trunk
+ cd /usr/src/panotools/trunk
+ svn co https://panotools.svn.sourceforge.net/svnroot/panotools/trunk/libpano libpano13
+ cd libpano13
+ sh ./bootstrap
+ make
+ sudo make install install-data-am
+== Hugin ==
+=== Checkout Hugin ===
+ mkdir /usr/src/hugin
+ cd /usr/src/hugin
+ svn co https://hugin.svn.sourceforge.net/svnroot/hugin/hugin/trunk hugin
+* if you need to build a specific SVN revision, e.g. 2765, you can slightly change the svn command to get it. e.g.:
+ svn co -r 2765 https://hugin.svn.sourceforge.net/svnroot/hugin/hugin/trunk/ hugin
+=== Compile Hugin ===
+ mkdir /usr/src/hugin/BuildHugin
+ cd /usr/src/hugin/BuildHugin
+ ccmake /usr/src/hugin/hugin
+ cmake /usr/src/hugin/hugin
+ make && sudo make install
+== autopano-sift-C ==
+Needed for automatic control point generation, restricted by software patents in some countries.
+ cd /usr/src
+ svn co https://hugin.svn.sourceforge.net/svnroot/hugin/autopano-sift-C/trunk/ autopano-sift-C
+ cd autopano-sift-C
+ mkdir build && cd build
+ cmake -DCMAKE_INSTALL_PREFIX=/usr/local ..
+ make
+ sudo make install
+== Status reports ==
 Success Report: On OpenSuSE 10.2 ist's really straightforward.
 * clean SVN chechout (version as of 20070204)
-* followed the instructions in INSTALL_cmake.
+* followed the instructions in '''INSTALL_cmake'''.
 * The only non-standard thing is libpano13, (2.9.12 was used)
 * All other dependencies have been resolved using the standard (smart) repositories for OpenSuSE (wxGTK is 2.6.3.3).
+Success Report: Confirmed working on OpenSuSE 10.3 and x86_64 architecture.
+Success Report: On OpenSuSE 11.0 x86_64.
+* you will need to make sure you have all of the build tools. (examples: gcc+ automake)
+* Also had to install libXML2 for autopano
+For OpenSuSE 11.1:
+* On x86_64 systems with libraries in /usr/lib64 or /usr/local/lib64 such as OpenSuSE, redhat or fedora you need to pass LIB_SUFFIX=64 to cmake
+[[Category:Software:Platform:Linux]]
+[[Category:Software:Hugin]]
+[[Category:Software:Hugin:Compiling]]