Hugin Assistant tab

From Wiki
Revision as of 07:35, 19 April 2012 by Zarl (talk | contribs) (link to Preferences, __NOTOC__ added)
Jump to: navigation, search

The hugin assistant automates nearly everything needed to create a panorama, just follow these three steps:

1. Load images...

Click on the Load images... button to select the photos you want to use in your panorama.

This tries to identify the field of view of your photos by looking at (EXIF) information stored by the camera itself. If this fails you need to enter the field of view manually, or let hugin calculate it from the Focal Length and Focal length multiplier.

Also select a matching Lens type from the drop-down list. If you are unsure try the default Normal (rectilinear).

2. Align...

Click on Align... will use an automatic tool (the one set as Default in the Control Point Detectors tab of the Preferences) to match images, then use the internal hugin optimiser to align them, correct exposure and white balance.

The result will appear in the hugin Preview window. If this looks good proceed with the third step (the Create panorama... button), otherwise you will need to make some changes to the project in the other tabs of the hugin Main window.

3. Create panorama...

Finally, use Create panorama... to stitch the panorama to an image file with standard quality settings.


Some settings allow you to customise the assistant.