Heads

There are a number of panoramic heads on the market, at widely varying prices. For me, the Jasper Engineering head has been an excellent value. At about $200, it's strong enough for serious 35mm or comparable digital cameras, which can be used horizontally or (with the included adapter) vertically. Nodal point correction is horizontal and covers a variety of focal lengths as long as (I'm guessing) 135mm or more. Like so many heads, a bubble level is included, but hard to read when the head is set up at eye level. The builder will add custom touches very reasonably, In my case I put a Wimberly/Arca quick realease plate on the base. The base is machined aluminum; they provided a peel and stick piece of rubber for the base (to keep the plate from slipping) for about ten bucks. Pivoting parts on this unit are tightened with cap screws which have patent caps on them to give more leverage in tightening. I ended up prying these off and taking a t-handle allen wrench with me. I'm using a D-70 and a 17-35 usually; a smaller camera would be fine without that extra step.