Difference between revisions of "Heads"

From PanoTools.org Wiki
Jump to: navigation, search
(Self made)
Line 126: Line 126:
Single row
Single row
* [http://www.heiliger-net.de/panphoto/n_hardware.htm Panphoto.de (German)]
* [http://www.heiliger-net.de/panphoto/n_hardware.htm Panphoto.de (German)]
* [http://www.nodalsamurai.co.uk/nodalsamurai.html Pete Loud's Nodal Samurai]
=== Material supply ===
=== Material supply ===

Revision as of 16:56, 12 October 2007

Off the shelf

There are a number of panoramic tripod heads on the market, at widely varying prices.


Agnos - Italian manufacturer of panoramic heads and accesories for panoramic photography. I bought an adapter for my fc-e9 fisheye adapter and it is very well built and of a good quality. They will also release (if they didn't yet) a new solution for creating a spherical pano out of 3 pics taken at 120 degrees each with a DSLR rotated at 45 degrees (!).

Bogen/Manfrotto 303SPH

A more expensive option is the Bogen/Manfrotto 303SPH, a large, but well made head. It could double as a boat anchor! I (Rick) have the 303SPH and the Agnos mentioned below. Bogen has a site dedicated to their line of pano heads Manfrotto 303SPH Mini-Site. Some users complain that the head sags - I have not experienced this. This head can be used with virtually any lens / camera combination. I used to use it with the FC-E9 fisheye, but the head left too large of a footprint in the image. --Add360.com 03:21, 7 Nov 2005 (EST)


For me, the Jasper Engineering head has been an excellent value. At about $200, it's strong enough for serious 35mm or comparable digital cameras, which can be used horizontally or (with the included adapter) vertically. Nodal Point correction is horizontal and covers a variety of focal lengths as long as (I'm guessing) 135mm or more. Like so many heads, a bubble level is included, but hard to read when the head is set up at eye level. The builder will add custom touches very reasonably, In my case I put a Wimberly/Arca quick realease plate on the base. The base is machined aluminum; they provided a peel and stick piece of rubber for the base (to keep the plate from slipping) for about ten bucks.

Pivoting parts on this unit are tightened with cap screws which have patent caps on them to give more leverage in tightening. I ended up prying these off and taking a t-handle allen wrench with me. I'm using a D-70 and a 17-35 usually; a smaller camera would be fine without that extra step.


Kaidan offers two tripod heads. The KiWi and QuickPan. The KiWi when equipped with Twin-Axis Bracket will work for smaller cameras equipped with fisheye lenses. This is a single-row solution. Kaidan's QuickPan Spherical will allow for multirow panoramas with either rectilinear or fisheye lenses. The aforementioned Twin-Axis Bracket will also work on the QuickPan for single-row fisheye panoramas.

Kaidan is also due to release their QuickPan Professional tripod head in the early part of 2006.

Nodal Ninja

Nodal Ninja built by Fanotec, satisfies price (approx $199), quality, ease of use, and portability (less than 500 grams). Used by professionals and amateurs alike this is an easy to use full spherical panoramic tripod head. With this pano head you are able to produce single row 360 degree cylindrical panoramas, multirow 360x180 degree spherical panoramas, or mosaics. With the optional T-adapter you can mount your camera in Landscape mode as well as use many third party quick release plates. This model does not support larger DSLR's like the D2X, Fuji S3 Pro or Canon Mark II type cameras or DSLR's using battery grips or larger lenses like the FC-E9 or the Rayonex (Raynox) lens. For these cameras Fanotec is developing the Nodal Ninja 5 due out est. August 2007.

MK PanoMachine

MK Panorama Systeme, Germany, offers motorised VR heads that allow for horizontal movement at an adjustable speed (min. 3 seconds per turn) while the integrated control unit triggers the camera. The camera has to be tilted manually. The housing for batteries, electronics and the motor will lead to a big footprint when doing full spherical panoramas. Earlier models than the current PanoMachine Version 3.0 drained batteries quickly, so an external power supply may be important in the field.

The company also has a rental service.


Novoflex is a German company with a good reputation in building high-precision photographic accessories. The company offers two already pre-assembled products:

The non-tiltable Panorama VR System for cylindrical panoramas.

The universal Panorama VR Pro System for spherical panoramas.

All parts are built modular to be combine- and interchangeable with others parts from Novoflex. E.g. you can use a standard angle bracket or focusing rack as a part of your panohead setup. This makes it easy to create a custom panorama head that fits your specific needs. Also, it gives you the option to upgrade your setup - or easily re-order a broken part.


360Precision offers two kinds of heads. Both are more expensive than you might expect but are very predictable panoramic heads. They are very sturdy and at the same time elegant.

The Absolute is a very plausible option for those that make panoramas frequently and with the same equipment each time. It is built to a specific body and specific lens combination, saving the photographer the need to find the entrance pupil for their lens and midpoint of the camera. Because of this, it is a very precise way to batch-create panoramas without needing to generate control points for each panorama. The sacrifice is that you lose the option of using a different combination of camera and lens with this head until you purchase an additional lens arm.

Although these limits may seem restrictive, the results are very, very predictable. One possible workflow includes calibrating a template in your software (hugin, PTGui, PTMac), and for every panorama afterward, apply the template and immediately skip to stitching. This saves you the time spent in generating and correcting control points in each panorama. For those that can save significant amounts of time and/or money by doing this, this head truly is a life saver. The generation of the template can be time consuming but may save you hours upon hours of post processing time compared to other solutions.

It is possible to upgrade the 360Precision in modular ways, for instance if you decide to use a different lens for your panoramas, you can order just the lens arm you need, or if you decide to use a different camera for panoramas, you can order just the different camera leg and use the same lens arm.

The Adjuste is nearly as strong as the Absolute but is easily adaptable for different camera / lens setups. The diameter of the rotating base is smaller which makes for a better (smaller) footprint if you shoot full spherical panoramas.

KingPano, Panosaurus

Very affordable pan/tilt heads which allow horizontal and vertical rotation around the nodal point i.e. for multi row panoramas are the, Panosaurus and KingPano.

Pinnacle VR Universal Pano Head

Priced towards the upper end of the middle ($399) is the Pinnacle VR head that will work with any camera where the tripod hole is in the center of the lens axis. Using pin registration, it can accomodate cameras with or without battery grips attached and supports a wide range of lenses from fisheye to 135mm (on a full frame sensor, 80mm on an APS sized sensor). Details and sample sets of images with PTGui templates can be found at Pinnacle VR

Rodeon VR Head

The Rodeon VR Head is a programmable pano head. Tilt and Rotation are motorised, all steps can be controlled using a Bluetooth device (Notebook or PDA).


Various unbias reviews are floating about on many of these panorama tripod heads:

360Precision: 360 Rage | PanoGuide Forum | Dr. Karl Harrison | Eric Rougier |

Kaidan: Precomania | VRPhotography Note: This is an older review |

Manfrotto 303SPH: Rosauro Ona | Precomania | VRPhotography |

Nodal Ninja: Digital Photographer Magazine | Rosauro Ona | Josh Korwin of XYZ Computing | PanoGuide Forum | Eric Rougier | Pixelmania (dutch) | 360 Rage | Thierry Rebours (french) | Cameraportal (dutch) | Coming Soon - Reviews by: Ken Rockwell.com, Zoom.nl, Ellis Vener, Dr. Karl Harrison

Novoflex: 360 Rage |

Panosaurus: Tabaware | Peter Watts | Panoguide forum |

Lens brackets

Another way to keep the lens/camera fixed to the no-parallax point are lens brackets that directly mounted onto the lens itself. The advantages are less vibrations but the drawback is that you need one bracket for each lens.

Some examples:

Self made

If you want to build our own pan/tilt head you might get some ideas from those shown below.


Single row

Material supply

Since you often can't get the popular aluminium profiles in your local do-it-yourself store here some possible suppliers:

A web search for "aluprofil" or "aluminium profile" might reveal other suppliers.