Equirectangular Projection

From PanoTools.org Wiki
Revision as of 01:52, 15 December 2005 by Jdsmith (talk | contribs) (added big ben image)
Jump to navigation Jump to search
Big ben equirectangular.jpg

This is a type of projection for mapping a portion of the surface of a sphere to a flat image. It is also called the "non-projection", or plate carre, since the horizontal coordinate is simply longitude, and the vertical coordinate is simply latitude, with no transformation or scaling applied. The equirectangular projection was used in map creation since it was invented around 100 A.D. by Marinus of Tyre. See Mathworld's page for more detailed information on the mathematics of this projection.

In an equirectangular panoramic image all verticals remain vertical, and the horizon becomes a straight line across the middle of the image. Coordinates in the image relate linearly to pan and tilt angles in the real world. The poles (Zenith, Nadir) are located at the top and bottom edge and are stretched to the entire width of the image. Areas near the poles get stretched horizontally.

The Equirectangular projection is the default output format of a rotating (scanning) panorama camera equipped with a fisheye lens -- 180� fisheye giving a full sphere at 360� rotation. Scanning cameras sometimes cover more than one 360� turn but software often assumes that equirectangular images cover 360� horizontally and 180� vertically, i.e. make sure that your equirectangular image has a proper aspect ratio of 2:1. Look at the pixel values -- a file with 1650 x 824 pixels lacks one pixel at the short side thus confusing some applications.

The Equirectangular projection is commonly used as the projection type of the source images for spherical panorama viewers, including PTViewer. The other possibility is the Cubic projection.