# Here's a script for upsampling a single image with ptstitcher.
# Substitute desired width and height of the upsampled image for 2000 and 1000;
# you can also change the output format if you like.
# It doesn't matter what value you give the v (field of view) parameter,
# as long as you use the same value on the o line at the bottom.
# The value of the u parameter doesn't matter either, since there are
# no overlapping images in the output.
p w2000 h1000 f0 v0.05 u0 n"TIFF"
################################################################################
# i7 means use sync1024 interpolation - the best but slowest;
# you could use i3 for sinc256 instead:
m g1 i7
################################################################################
# Substitute your original filename for orig.tif.
# Keep the quote marks:
i n"orig.tif"
################################################################################
# The v parameter must match the v parameter on the p line above;
# all the others should be zero because we don't want to introduce
# any yaw, pitch, roll, offset, or shear, or distort the image in
# any way with "lens coefficients":
o f0 y0 r0 p0 v0.05 a0 b0 c0 d0 e0 g0 t0