Difference between revisions of "DSLR spherical resolution"
Erik Krause (talk | contribs) m (→Pixel density: typo) |
Erik Krause (talk | contribs) m (Prepared for new glossary template) |
||
Line 1: | Line 1: | ||
+ | {{Glossary|What spherical panorama resolution can I obtain from a certain fisheye/camera combination.}} | ||
==Intro== | ==Intro== | ||
In general photography megapixels are more or less synonymous to resulting image resolution. Panorama photography is a bit different, especially spherical panoramas. Here the sensor pixel density is more important than the sensor pixel count. | In general photography megapixels are more or less synonymous to resulting image resolution. Panorama photography is a bit different, especially spherical panoramas. Here the sensor pixel density is more important than the sensor pixel count. |
Revision as of 00:22, 18 November 2007
Intro
In general photography megapixels are more or less synonymous to resulting image resolution. Panorama photography is a bit different, especially spherical panoramas. Here the sensor pixel density is more important than the sensor pixel count.
The Problem
Digital Single Lens Reflex (DSLR) cameras exist in three major groups:
- With FourThirds sensor (crop factor 2.0)
- With an APS-C type sensor (crop factor 1.5 or 1.6)
- With a sensor of the full 35mm film size (crop factor 1.0)
In each size category there are several cameras with different sensor resolutions. And there are several lenses that can be attached to cameras with different sensor sizes. To have the effects of different lenses comparable the concept of a 35mm equivalent focal length has been established - the real focal length multiplied with the crop factor gives the same Field of View like for a 35mm film camera.
However, this is not possible for fisheye lenses, since the Focal Length does not correspond linearly to the Field of View. One has to look at the degree/mm ratio and absolute pixel density instead.
Degree/mm
In the Fisheye Projection an angular distance from the optical axis maps to a linear distance on the sensor. The mapping is determined by the focal length (the following numbers are approximations, since real fisheyes almost never resemble the ideal fisheye mapping):
- 8mm focal length 7.2°/mm
- 10.5mm focal length 5.5°/mm
- 16mm focal lenght 3.6°/mm
Pixel density
To deduce the pixel resolution obtainable by a certain sensor/lens combination we should know the density in pixels/mm of the respective sensor. The pixel density can be calculated roughly from the Megapixels (better would be actual pixel size) and the sensor size. For the three major groups and some typical Megapixel sizes:
FourThirds with 13.5mm short side
Megapixel 6 8 10 Short side px 2121 2450 2739 px/mm 157 181 203
APS-C with 16mm short side
Megapixel 6 8 10 12 Short side px 2000 2309 2582 2828 px/mm 125 144 161 177
Full size with 24mm short side
Megapixel 6 8 10 12 16 21 Short side px 2000 2309 2582 2828 3266 3742 px/mm 83 96 108 118 136 156
Pano sizes
From the above values we can easily calculate some sample panorama resolutions. The table gives some rounded values for the maximum pixel size of an equirectangular:
FourThirds MP - - - - 6 8 10 APS-C MP - - 6 8 10 12 - Full size MP 6 8 12 16 21 - - pixel/mm 80 100 120 140 160 180 200 f=8mm size 4000 5000 6000 7000 8000 9000 10000 f=10.5mm size 5200 6500 7900 9200 10500 11800 13100 f=16mm size 8000 10000 12000 14000 16000 18000 20000
The formula for an exact calculation is
--Erik Krause 22:11, 21 August 2007 (CEST)