Hugin Preferences

From Wiki
(Difference between revisions)
Jump to: navigation, search
(Control Points Detectors)
Line 132: Line 132:
== Nona ==  
== Nona ==  
Here you can set '''Default interpolator'' used during stitching.
Here you can set the '''Default interpolator''' used during stitching. [[Interpolation]] is a quality setting, but the default of '''Poly3 (Bicubic)''' is good for most purposes. You are unlikely to notice any difference between interpolators other than that '''Nearest neighbor''' is fast but very low quality.
You can set '''Create cropped images by default''' which will speed up stitching.
'''Use GPU for remapping''' will activate currently experimental nona code to remap images using ''Graphical processor unit''.
You can '''Create cropped images by default''', these [[Cropped TIFF]] images will speed up stitching, but some image editors do not process the offsets correctly.
'''Use GPU for remapping''' will activate experimental [[nona]] code to remap images using the shading language of the ''Graphics Processing Unit'' in modern video hardware .
== Enblend ==
== Enblend ==

Revision as of 22:26, 15 October 2009


Resource usage

To speed things up hugin keeps a copy in memory of as many input photos as possible. With very large projects, this would use all your system memory, so set Image cache memory to a value below your available free RAM. The default of 200MB should be ok for a system with 512MB of RAM, however this is very conservative, for large projects you will want to set this to a high proportion of your available system memory.

The hugin Preview window is multi-threaded so can use more than one CPU/core if required. Set Number of CPUs to how many CPUs you wish to use.

User interface

Usually, hugin will use the current locale to determine the language of buttons, menus etc... Set the Language if you need to switch languages temporarily or if you are using a platform such as Windows95 that doesn't support localised software. hugin won't change language immediately, you will need to stop and restart it.

File options

Some hugin actions generate large temporary files, change the Tempdir to specify an alternative location for writing these files. One reason for setting this independently from the operating system would be to use a RAM disk to speed up stitching.


The Hugin Assistant tab automates the entire panorama creation process, these settings allow you to customise the assistant.

Image loading

Select Automatically align images after loading to run the second Align... step immediately after loading the images.

Automatic control point checking after detecting control points

Select Remove cloud-like control points (Celeste) to run celeste after detecting control points. Celeste will remove Control points set to clouds, this is useful because clouds will move several pixels between shots and are therefore bad scene objects to use for alignment.

Select Remove outlying control points by statistical method to run cpclean, this will try to remove control points with positions that are not credible under pairwise optimisation.

Auto align

Auto align uses autopano-sift or autopano to generate control points between pairs of images, set Number of Ctrl Points per overlap to control the number of control points. Note that although most pictures can be stitched with just three or four control points, automatically generated points tend not to be very evenly distributed, so this number should be set to ten or more

The size of the output Panorama Image Size is usually set in the Hugin Stitcher tab where it is also possible to Calculate Optimal Size based on the sizes of the input images. The Auto align process does something similar, though here you can set a smaller output as a percentage. Generally setting a percentage of 70% leads to no great loss of quality due to the way a camera CCD samples data.

Show preview

After completing Align..., the Hugin Assistant tab will usually display the result in a preview window, here you can change this to Nothing for no preview at all, Fast Preview Window or Preview Window.

Control Points Editor

HDR and 16bit display mode

hugin supports both HDR and 16bit imaging. These image formats contain a lot more brightness and colour information than can be displayed on a standard computer monitor, so hugin only shows a rough representation of these pictures.

16bit data can have linear or corrected gamma. Linear images appear very dark on many monitors, so set the Curve to gamma 2.2.

For HDR data, try setting the Curve to logarithmic.

Changes to the HDR and 16bit display mode require restarting hugin to take effect.


hugin helps position control points to within a fraction of a pixel distance automatically:

  • Patch width, the size of the square of pixels taken from the left photo to match with the right photo when picking control points, reduce if this is taking a long time on your system.
  • Search area width, the percentage area of the right photo that is searched when picking control points, reduce if this is taking a long time on your system.
  • Local search area width, the region of the right photo searched when you click Fine-tune in the hugin Control Points tab or Fine-tune all Points in the hugin Main window Edit menu.
  • Correlation Threshold. For each Fine-tune, hugin calculates the quality of the control points match, raise this threshold to reject dubious matches.
  • Peak Curvature Threshold, Currently unused.

Rotation search

Enable this if your photos:

Control Points Detectors

hugin uses an external tool for automatically creating control points for a set of images either when:

In list-box you can choose default Control point detector programs such as :

  • autopano-sift-C - part of hugin suite
  • Panomatic (by Anael Orlinski)
  • Align image stack - part of hugin suite. Note that align_image_stack is not a general purpose control point detector, but is very effective for aligning images within stacks.
  • Match-n-shift
  • Autopano (by A. Jenny), closed source, available for Linux i386 and Windows 32bit.
  • Autopano-SIFT (by S. Nowozin), open source, available for Linux, Windows and OS X.

If you want to use a similar command-line tool that isn't already listed, this can configured with the New... button.

Parameters for these tools can be customized in the Parameters for Control Point Detectors window, which you can open using Edit... or New... buttons. Typical tweaks might be to:

  • Set --noransac for autopano-sift when using non-rectilinear Projection input images.
  • Set --size for autopano-sift which by default downsizes images to 700 pixels before matching.
  • Some operating systems have problems supplying more than 120 or so photos at one time to these external tools, with autopano-sift-C 2.5.2 or later you can use these alternative arguments to specify input via a project file: --maxmatches %p %o %s


In the final stitching process nona reprojects and distorts images to fit, enblend takes these images as individual TIFF files and merges them using sophisticated seam positioning and blending into a single finished TIFF file.


Here you can set the Default interpolator used during stitching. Interpolation is a quality setting, but the default of Poly3 (Bicubic) is good for most purposes. You are unlikely to notice any difference between interpolators other than that Nearest neighbor is fast but very low quality.

You can Create cropped images by default, these Cropped TIFF images will speed up stitching, but some image editors do not process the offsets correctly.

Use GPU for remapping will activate experimental nona code to remap images using the shading language of the Graphics Processing Unit in modern video hardware .


The Use alternative Enblend program option allows you to use other tools with a similar interface such as smartblend or enblend-mask.

enblend supports a range of Additional arguments, for example you may want to set:

  • -a Pre-assemble non-overlapping images to speed up blending. This is generally useful, but will slow blending in rare cases.
  • -l number Number of levels to use (1 to 29), larger numbers result in wider seams. E.g. setting 1 will result in a 2 pixel wide blend, 8 will result in a 256 pixel wide blend and you are extremely unlikely to want a blend level as high as 16.
  • -b kilobytes Image cache block size (default=2MiB)
  • -c Use CIECAM02 to blend colors. Your input images need to have embedded colour profiles for this to work.
  • -m megabytes Use this much memory before going to disk (default=1GiB). Increase if you have a lot of memory on your system.
  • --fine-mask Enables detailed mask generation.
  • --no-optimize Turn off mask optimization.

Note that setting Additional arguments here will only effect new projects, to change enblend and enfuse settings for the current project use the hugin Stitcher tab.


If one of Exposure fusionoutput options is selected in the hugin Stitcher tab then enfuse will be used to merge bracketed exposures during stitching.


Often a project has many control points attached to clouds in the sky, this is usually unwanted as clouds move between photos. celeste will attempt to identify 'sky' control points and delete them.

Personal tools