Hugin Panorama Workflow
Hugin provides different work flows for generating panoramas. This page will list some possibility and give you some suggestions for your own work flow.
This is not a step by step instruction. Not all projects will need all steps. It will give you some ideas for your own projects.
The panorama creating consists of two major steps:
- generating project file and align images
- stitching of project file
The following chapters will give you some details for both steps. You can combine both steps as you like. You can run all full automatic, or you can run all manual, or you can generate the project on the command line and stitch with PTBatcherGUI, or you can all do on the command line, or or or...
Generating project file
Fully automatic generation
PTBatcherGUI provides an options to create a project file and run the assistant on these generated project files. Go to File>Search directory for...>Images and select the path to your images. After pressing Start PTBatcherGUI will search for possible projects depending on the EXIF information in the images. When the search is finished, the bottom list box displays all found panoramas. Select the panoramas you want to process and then click Send selected panoramas to queue to send these panoramas to the assistant queue. When you now start the batch processing, the assistant is running on all project files.
If you tick the option Automatic stitch after assistant the panorama will be stitched after running the assistant. This will give you a full automatic panorama processing from the input images to the final panorama.
Also in Hugin an automatic alignment can be achieved. After adding the images run the assistant on this project. You can also send the projects to the assistant queue and process the project files later (e.g. during night).
Project file can be generated and aligned in Hugin. A possible work flow would be
- Add images.
- Assign lens and stacks.
- Find control points, e.g. with cpfind.
- Control point checking (celeste, cpclean, manual)
- Geometric optimisation (yaw, pitch, roll, lens parameters).
- Photometric optimisation (exposure values, vignetting, white balance).
- Select output parameters (projection, canvas size, ...)
The project can also be created and aligned with command line tools (see here for more details).
A workflow similar to the assistant would be look like:
pto_gen -o project.pto *.jpg cpfind -o project.pto --multirow --celeste project.pto cpclean -o project.pto project.pto linefind -o project.pto project.pto autooptimiser -a -m -l -s -o project.pto project.pto pano_modify --canvas=AUTO --crop=AUTO -o project.pto project.pto
An other approach for multi-row panoramas with featureless images could look like:
pto_gen -o project.pto *.jpg pto_var -o project.pto --set y=-100+(i%6)*40,p=(i<6)?-30:30,r=0 project.pto cpfind --prealigned -o project.pto project.pto geocpset -o project.pto project.pto linefind -o project.pto project.pto autooptimiser -a -m -l -s -o project.pto project.pto pano_modify --canvas=AUTO --crop=AUTO -o project.pto project.pto
All stitching engine uses the same code base. So there is no preferences for one or the other. It is a matter of taste, which one you use.
The default stitching engine is PTBatcherGUI. You can add different projects to a queue and process the queue later without control. But it can also be configured to start immediately.
You can also stitch all project files in a given directory: After select the directory in File>Search directory for...>Project all project files will be added to the queue.
Hugin_stitch_project can only stitch a single project. The processing starts immediately.
The stitching can also be started from the command line:
pto2mk -o project.mk -p prefix project.pto make -f project.mk all
The makefile can also created during project save in Hugin, if you select Create makefile automatically during project save in the Hugin preferences.