With Photoshop CS2 it has become very easy to create true HDR images from bracketed exposure series. There is a nice tutorial by Brian Greenstone on how to assemble multiple exposures into one HDR file: 
He describes the necessary steps to compress the high dynamic range with photoshop built in "Local Adaption", too. However, sometimes it is very hard to get decent results this way. Two HDR compression plugins are now available for this purpose. Photomatix Tone Mapping plugin from HDRSoft and FDRCompressor from FDRtools.
I just played a bit with both plugins, so please don't expect the best possible results. May be someone with more experience can give better instructions.
Both plugins are currently only available for Windows, both have announced a Mac OSX version very soon.
Many thanks to Raanan Fattal for letting me use his Belgium House HDR image: 
The plugin opens with a dialog where 9 parameters can be adjusted. However, according to  only 5 of them are relevant for most images (text taken from the page):
- Compression controls the strength of tonal value range compression and is most important among all parameters. Higher dynamic range requires stronger compression. Values between 1 and 5 work best for RAW images while HDR scenes may require values up to 10.
- global Contrast provides a possibility to influence image contrast in excess of what 'Compression' already does. For scenes with extreme dynamic range 9 is the right value. Otherwise the default value 8 is very good.
Note: scenes with large areas of equal intensity do not really profit from this contrast boosting. Here values above 8 are not useful.
- Exposure acts like setting the exposure of a camera. The right value for this parameter is determined from the zoom view (right pane). It should be adjusted so that the lighest image areas do not appear overexposed.
- Black determines the black point setting. The value should be gradually increased until the preview (left pane) does not show further substantial dimout. In normal cases good values lie between 1 and 10.
Note: values too high are bad as this maps too many pixels to the same value which results in loss of detail.
- 360�Pano wraps the image around in order to avoid seams at the 0�/360� boundary if checked.
The image comes out a bit flat with low contrast. This is because it is still 32 bit per channel and has to be reduced to 16 or 8 bit and the black and white point have to be set.
The black and white point adjustment is best done in L*a*b color space in order to preserve color saturation. I simply used the 'Auto' button and adjusted gamma a bit to get the image a bit brighter.
The general appearance after that step is good. No visible halos, detail contrast is ok, no reversed gradients.
Photomatix Tone Mapping
The plugin opens with a dialog where 8 parameters can be adjusted. From the help file:
- Luminosity Adjusts the brightness of the shadows and the amount of local contrast enhancement. Moving the slider to the right has the effect of boosting shadow details and brightening the image. Moving it to the left gives a more natural look to the tone mapped image.
The optimal value depends on the dynamic range of the image.
- Strength Controls the strength of local contrast enhancements. A value of 100% gives the maximum increase in local contrast.
The optimal value depends on the image and the effect you want to achieve.
- Color Saturation Controls the saturation of the RGB color channels. The higher the saturation, the more intense the color. The value affects each color channel equally.
The optimal value is a matter of taste. You may need a different value to achieve the same color intensity depending on the image (the dynamic range has an influence on color saturation).
- White Clip - Black Clip Both sliders control how the minimum and maximum values of the output image are set. Moving the sliders to the left increases global contrast. Moving them to the left reduces the clipping at the extremes. The White Clip slider sets the value for the maximum (pure white or level 255). The Black Clip slider sets the value for the minimum (pure black or level 0).
The optimal values depend on the image. You can use the histogram as a guide to the effects of those sliders.
- Smoothing Controls the amount of smoothing of luminance variations. Setting a lower value increases sharpness.
The optimal value depends on the image.
- Microcontrast Sets how much local details are accentuated.
The default value (High) is the optimal value in most cases. However, a lower value may be useful in the case of a noisy image or when the accentuation of local details is not desirable (e.g. seams of a stitched pano in a uniform area may become visible when local details are too much enhanced). In those cases, it is recommended to move the "Luminosity" slider to the left once you have set a lower value for the Microcontrast.
- 360� image This option needs to be checked when the image processed is an equirectangular image set to be viewed as a 360� panorama. Given that the tone mapping takes into account local contrast, the 360� seams of an equirectangular image will be assigned different tonal values, which will result in a visible seam once the tone mapped image is rendered in a panorama viewer. Checking this option will correct for this.
This option should only be checked for equirectangular 360� images. Checking it in other cases may produce less optimal results.
The image comes out with good contrast - white and black point settings are apparently done by the White Clip and Black Clip values. It is in 32 bit per channel mode too and has to be reduced to 16 or 8 bit. "Equalize Histogram" does not give better results here.
The general appearance is pretty good at the first glance, with good contrast for the outside scene and no reversed gradients.
At a closer look it shows some halos - the door frame is too dark where the bright column is behind. If you look at http://www.hdrsoft.com/ this could be a general problem of photomatix. The result resembles a bit the [original Gradient Domain HDR compression result|http://www.cs.huji.ac.il/~danix/hdr/pages/belgium.html] of Fattal, Lischinski and Werman.
The two plugins are very powerful tools for compression of real high dynamic range images like it would not have been possible only few years ago. They can compete with the most recent research on that topic. The results are very similar, however, I don't like the halos Photomatix produces.
For your convenience here a side by side comparison:
--Erik Krause 16:06, 9 Dec 2005 (EST)