Fixing nadir parallax errors
(fisheye nadir doesn't really work, use rectilinear instead)
m (1 revision(s))
Revision as of 20:09, 21 March 2007
Here is a set of source photos for a spherical panorama:
They were taken using a one second exposure without a tripod, the camera was stabilised by jamming it against the sides of a palm tree. This means that they don't stitch easily because of the large (approximately 60cm) parallax error:
However the nadir can be stitched by taking advantage of another technique generally used for stitching a linear panorama. The way this works is that if you assume the ground forms a plane just like a mural on a wall; a series of rectilinear Projection images taken from different locations can be assembled by optimising roll, pitch & yaw, Field of View and d & e lens correction parameters separately for each image.
So the first step is to create a series of defished rectilinear images from the fisheye Projection originals. You can do this in any of the GUI front-ends, but you do need to calibrate your lens first:
This plan image can then be reinserted into the original panorama project as if it was another source photo with a different lens, and then stitched as normal by optimising roll, pitch, yaw, Field of View and d & e lens correction parameters. Here is the result as a QTVR:
This scene is of the Abu Dhabi corniche, 30th November 2006. The buildings are decorated in preparation for UAE national day.