Dcraw

From PanoTools.org Wiki
(Difference between revisions)
Jump to: navigation, search
(added other image processors section)
Line 1: Line 1:
 +
=== Intro ===
 
From an article by David Coffin:
 
From an article by David Coffin:
 
<blockquote>
 
<blockquote>
Line 13: Line 14:
 
'''dcraw''' can write 16 bit per channel image files (on windows [[PSD]] files are supported) which contain all the image information of the [[RAW]] file in a linear (gamma 1.0) color space.
 
'''dcraw''' can write 16 bit per channel image files (on windows [[PSD]] files are supported) which contain all the image information of the [[RAW]] file in a linear (gamma 1.0) color space.
  
 +
=== Usage with Photoshop ===
 
[[Photoshop]] users can use this files simply by assign a gamma 1.0 color space (and then convert to working space if needed). A gamma 1.0 color space can be created with following steps:
 
[[Photoshop]] users can use this files simply by assign a gamma 1.0 color space (and then convert to working space if needed). A gamma 1.0 color space can be created with following steps:
 
* Choose '''Color Settings''' from '''Edit''' menu.
 
* Choose '''Color Settings''' from '''Edit''' menu.
Line 25: Line 27:
  
 
Even after conversion into a gamma 2.2 working space the images might look dull. Don't worry. If you use them with [[full 16 bit workflow]] for panorama creation you wont loose anything. You can adjust  levels and contrast in your ready stitched panorama.
 
Even after conversion into a gamma 2.2 working space the images might look dull. Don't worry. If you use them with [[full 16 bit workflow]] for panorama creation you wont loose anything. You can adjust  levels and contrast in your ready stitched panorama.
 +
 +
=== Other Image processors ===
 +
Users of other operating systems or other image processores can apply a gamma of 2.2 to those linear gamma files produced by '''dcraw''' in their favourite 16 bit per channel capable image processor (f.e. [http://cinepaint.sourceforge.net/ Cinepaint] on Linux).
  
 
<small>--[[User:Erik Krause|Erik Krause]] 10:41, 7 Jul 2005 (EDT)</small>
 
<small>--[[User:Erik Krause|Erik Krause]] 10:41, 7 Jul 2005 (EDT)</small>

Revision as of 15:54, 7 July 2005

Intro

From an article by David Coffin:

What is dcraw?

Quite simply, it's an ANSI C program to decode any raw image from any digital camera on any computer running any operating system. It is a unique and vital tool in the world of digital photography.

Thousands of people use dcraw without knowing it, as Bibble, BreezeBrowser, IrfanView, Conceiva, and the Adobe Camera Raw plugin all contain source code from dcraw.

Thanks to Dave Coffin the usage of digital cameras is no longer limited to computers running Windows and MacOS, and thanks to him there is a unique way to extract the full dynamic range from RAW files in one go.

dcraw can write 16 bit per channel image files (on windows PSD files are supported) which contain all the image information of the RAW file in a linear (gamma 1.0) color space.

Usage with Photoshop

Photoshop users can use this files simply by assign a gamma 1.0 color space (and then convert to working space if needed). A gamma 1.0 color space can be created with following steps:

  • Choose Color Settings from Edit menu.
  • Check Advanced Mode
  • Choose sRGB IEC61966-2.1 from the RGB droplist under Working Space.
  • Choose Custom from the same droplist (very top).
  • In the Custom RGB dialog set Gamma to 1.0 - leave all other values as they are.
  • Enter appropriate name (f.e. sRGB Gamma 1) and leave dialog by pressing Ok.
  • In the Color Settings dialog choose Save RGB from the RGB dropdown list.
  • Give an appropriate name (f.e. sRGB Gamma 1.icc) and save (this might be slightly different for Mac users).
  • Close the Color Settings dialog by pressing Cancel (in order not to choose the new profile as working space.

Even after conversion into a gamma 2.2 working space the images might look dull. Don't worry. If you use them with full 16 bit workflow for panorama creation you wont loose anything. You can adjust levels and contrast in your ready stitched panorama.

Other Image processors

Users of other operating systems or other image processores can apply a gamma of 2.2 to those linear gamma files produced by dcraw in their favourite 16 bit per channel capable image processor (f.e. Cinepaint on Linux).

--Erik Krause 10:41, 7 Jul 2005 (EDT)

Personal tools
Namespaces

Variants
Actions
Navigation
tools
Tools