Difference between revisions of "Crop factor"

From PanoTools.org Wiki
Jump to: navigation, search
(basic page)
 
m (difference != factor)
Line 1: Line 1:
The '''crop factor''' is the difference between the size of the [[CCD]]
+
The '''crop factor''' is the ratio between the size of the [[CCD]]
 
sensor in your camera and the size of a typical 35mm film frame.
 
sensor in your camera and the size of a typical 35mm film frame.
  
Line 5: Line 5:
 
be around 6 and the crop factor for a DSLR is usually around 1.5.
 
be around 6 and the crop factor for a DSLR is usually around 1.5.
 
Some DSLRs have a 35mm size sensor so the factor for these is 1.
 
Some DSLRs have a 35mm size sensor so the factor for these is 1.
 +
 +
Alternatively it is easy to calculate as the ratio between the actual
 +
[[Focal Length]] and the 35mm equivalent focal length of the camera. Those two
 +
values can be found on the specification page of any digital camera
 +
where the CCD/CMOS size is harder to find
  
 
External link: [http://www.millhouse.nl/digitalcropfactorframe.html The digital crop factor explained]
 
External link: [http://www.millhouse.nl/digitalcropfactorframe.html The digital crop factor explained]
  
 
[[Category:Glossary]]
 
[[Category:Glossary]]

Revision as of 21:52, 17 October 2006

The crop factor is the ratio between the size of the CCD sensor in your camera and the size of a typical 35mm film frame.

Usually CCDs are smaller, so the crop factor for a pocket camera can be around 6 and the crop factor for a DSLR is usually around 1.5. Some DSLRs have a 35mm size sensor so the factor for these is 1.

Alternatively it is easy to calculate as the ratio between the actual Focal Length and the 35mm equivalent focal length of the camera. Those two values can be found on the specification page of any digital camera where the CCD/CMOS size is harder to find

External link: The digital crop factor explained