Difference between revisions of "Align a stack of photos"

From PanoTools.org Wiki
Jump to navigation Jump to search
(→‎Aligning with hugin: Added some keyboard shortcuts and menu descriptions; not sure if this is windows-specific, though)
Line 19: Line 19:
  
 
* Start up a new [[hugin]] project for each series and load the images.  Set the [[Field of View]], [[lens correction model|lens parameters]] and [[projections|projection]] type, ie. if your lens is a [[fisheye Projection|fisheye]], set this for both the input and output projection.
 
* Start up a new [[hugin]] project for each series and load the images.  Set the [[Field of View]], [[lens correction model|lens parameters]] and [[projections|projection]] type, ie. if your lens is a [[fisheye Projection|fisheye]], set this for both the input and output projection.
 +
* Create control points via the Images tab.  [[Panomatic]] may give better results than [[Cpfind]].
 +
* Select "Positions and View (y,p,r,v)" and "Optimise now!" in the Optimise tab.
 +
* If necessary, fine tune the control points in the Control Points tab.
 +
* In the fast panorama preview, the images will be on top of each other.  Select "Move/Drag" and "Fit", then deselect all images except the first.  Select "Crop" and "Auto-Crop".
 +
* Deselect the first image and select the second image.  Crop manually by only reducing the size of the crop rectangle.  Continue one by one until the crop rectangle has been adjusted for all the images.
 +
* Select all the images again.
 +
* In the Stitcher tab, select "Calculate Optimal Size", then deselect the default panorama outputs and select "No exposure correction, low dynamic range" in the "Remapped images" section.  Select "Stitch!".
  
−
* Create a few hundred [[control points]] between each pair of consecutive photos with the '''g''' key in the '''control point''' tab.
+
See a more detailed view of this article [http://www.lemis.com/grog/photography/aligning-with-Hugin.php here].
−
 
 
−
* Fine tune all points (available in the Edit menu)
 
−
 
 
−
* Delete any control points with a correlation less than 90% (i.e. open the control point list (F3 or the Show Control Points icon in the toolbar), press the '''select by distance''' button, enter -0.9, and hit the '''delete''' button).
 
−
 
 
−
* Optimise positions ('''ctrl-T'''), select points by distance again but this time enter 0.2. Optimise again.
 
−
 
 
−
* Adjust the field-of view in the '''stitching''' tab to something slightly smaller than the input size so there are no transparent edges.
 
−
 
 
−
* Stitch to '''multiple TIFF''' format.
 
−
 
 
 
[[Category:Tutorial:Specialised]]
 
[[Category:Tutorial:Specialised]]

Revision as of 04:51, 10 February 2013

There are occasions where it is necessary to align a set of otherwise identical pictures:

  • Aligning red, green and blue channels to correct chromatic aberration.
  • Aligning photos taken over a period of time to create a time-lapse movie.
  • Aligning bracketed shots to create a single HDR or contrast blended image.
  • Aligning photos taken at different focus distances to merge into a single extended Depth of Field image.

Panorama tools is particularly useful for this process since it allows sub-pixel alignment and has a sophisticated lens correction model for applying distortion - Even photos taken years apart with different cameras can be aligned perfectly.

Most tools for HDR generation such as photomatix have some level of automatic alignment, so this may be sufficient for most purposes. Otherwise the hdrprep perl script automates the process described below:

Aligning with hugin

  • Start up a new hugin project for each series and load the images. Set the Field of View, lens parameters and projection type, ie. if your lens is a fisheye, set this for both the input and output projection.
  • Create control points via the Images tab. Panomatic may give better results than Cpfind.
  • Select "Positions and View (y,p,r,v)" and "Optimise now!" in the Optimise tab.
  • If necessary, fine tune the control points in the Control Points tab.
  • In the fast panorama preview, the images will be on top of each other. Select "Move/Drag" and "Fit", then deselect all images except the first. Select "Crop" and "Auto-Crop".
  • Deselect the first image and select the second image. Crop manually by only reducing the size of the crop rectangle. Continue one by one until the crop rectangle has been adjusted for all the images.
  • Select all the images again.
  • In the Stitcher tab, select "Calculate Optimal Size", then deselect the default panorama outputs and select "No exposure correction, low dynamic range" in the "Remapped images" section. Select "Stitch!".

See a more detailed view of this article here.

Retrieved from "https://wiki.panotools.org/index.php?title=Align_a_stack_of_photos&oldid=15021"