Difference between revisions of "16bit workflow with hugin"

From PanoTools.org Wiki
Jump to: navigation, search
m (14 revision(s))
m (link capitalisation fix)
Line 29: Line 29:
You can now delete the intermediate [[PPM]] files.
You can now delete the intermediate [[PPM]] files.
Alternatively [[ufraw]] can be used for the entire conversion from [[RAW]].
Alternatively [[UFRaw]] can be used for the entire conversion from [[RAW]].
If necessary, correct [[chromatic aberration]] and [[vignetting]] with [[fulla]] at this stage.
If necessary, correct [[chromatic aberration]] and [[vignetting]] with [[fulla]] at this stage.

Revision as of 20:03, 16 August 2006

This tutorial doesn't cover reasons why you might want to shoot with RAW and stitch in 16bit format. It is a simple HOWTO listing the tools available and how to use them with hugin.

Preparing the 16bit images

Start by using dcraw to read the RAW files and batch convert them into portable 16bit per channel PPM files. RAW pictures from my Nikon 8700 have a .nef extension, so the command looks something like this:

 dcraw -v -w -4 dscn*.nef

Note that although hugin, nona and enblend support HDR floating-point data, there is no real loss converting RAW data to 16bit colour depth as RAW images are typically only 12bit in the first place. If you need a greater dynamic range than found in RAW images, it is possible to combine bracketed exposures in a HDR workflow with hugin.

These PPM files are not readable by hugin or nona, so the next step is to use ImageMagick to create 16bit per channel TIFF files:

 convert -rotate 270 -gamma 2.2 dscn3088.ppm dscn3088.tif
 convert -rotate 270 -gamma 2.2 dscn3089.ppm dscn3089.tif

Note that I rotated them at the same time since these are portrait shots. Gamma correction is also applied at this stage since RAW data is generally linear and difficult to view without colour profile management (not yet supported by hugin).

You can now delete the intermediate PPM files.

Alternatively UFRaw can be used for the entire conversion from RAW.

If necessary, correct chromatic aberration and vignetting with fulla at this stage.

Stitching with hugin

The TIFF images can be loaded into hugin as per usual except:

Information about the field of view was lost during the PPM stage, so this will need to be re-entered manually or re-optimised with PTOptimizer.

autopano-sift currently only supports 8bit per channel images, so if you want to use this tool then you need to create temporary 8bit versions of each image, generate control-points and then replace the images with the full version. Create the 8bit files by adding -depth 8 to the convert command-line above.

Stitch the images as per usual into a TIFF file, you can use enblend as the final step.

Post processing

This TIFF file is in 16bit per channel RGBA format, which is not viewable in most image viewers or web-browsers, so there is an extra step to create portable images. Open the file in a 16bit aware image editor such as cinepaint or krita, tweak the colours, retouch or apply a contrast mask and finally save in an 8bit per channel format such as JPEG.